Bike Preparation - “Bike must be in good working order”

1) All riders’ bikes must meet the technical requirements and sign off that you have! It is on your honor, although we may do a few random bike checks. If you fail, you will need to comply and if you can’t, you will NOT ride nor receive a refund.


2) Tires and brakes must be in good condition. Tires should be at least 75% of new condition and make sure your tires have enough air. 


3) All glass (mirrors, headlight, turn signals, and lenses) must be taped over or removed; plastic versions do not need to be taped but you would need to disconnect each so that they do not illuminate.  We suggest blue painter’s tape (masking tape) being it does not leave any residue.  Note – we usually have some extra tape if you don’t have any.

4)  Action Camera Usage:  Action cameras that are permanently attached with a solid mount are allowed to be used on the track by participants. If the camera is attached to the rider's helmet it must be attached with permanent adhesive, it cannot be a suction cup mount or strap. Any cameras MUST be secured with a safety tether in addition to the primary mount (permanent adhesive or suction cup), so that if the primary mount comes loose the camera will not fall off the bike onto the track. If a camera falls off your bike or person at any point during a track day, you will not be allowed to use a camera on the track for the remainder of the event. If a camera falls off your bike or person again at any future event, you will not be allowed to use a camera on the track at any ZARS event again from that point forward.